When ordering a Type 200 Series Bearing Assembly, the following information is needed to determine the correct assembly for your application:

1.	Choose a hanger frame suitable for your application. 200 Series assemblies are symetrical so the direction of rotation does not need to be specified.
2.	Choose a bearing style - keep in mind that the 200 series bearing cartridges will only fit in the 200 Series Hanger Frames. Solid bearing cartridges of the same design are less expensive than split cartridges. Specify the length, 1 ¾", 2", or 2 ½".
3.	Choose a grade - if you do not know the applicable grade, a grade can be determined based on the maximum temperature and other operating conditions of the application.
4.	Specify the bore size or shaft size required for the application.
5.	A 200-CL Clip Spring is necessary for each assembly to hold the bearing cartridge in place.

Although METCAR^® does not offer E commerce, if you have this information available you can email or fax your inquires to our office. Be sure to include:

1. Frame and shaft rotation
   
2. Style of bearing
   
3. Grade specification
   
4. Shaft size
   
5. 200-CL Clip Spring